Posts by admin
Henry Blue Skin SA
Blueskin SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound, which is integrally laminated to a blue engineered thermoplastic film. The membrane is specifically designed to be self-adhered to a prepared substrate, providing an air/vapor/water barrier in full wall applications or as penetration/flashing membrane with other air barrier systems. Blueskin SA, in…
Read MoreSoft Type Backer Rod
Joint forming, pliable, non-gassing, polyolefin foam backer rod. Ideal for irregular joint applications. Control sealant depth Create a backstop to allow proper sealant tooling Ensure sealant adhesion to joint surfaces only And yield a proper bond break between backup material and sealant
Read MoreCarlisle CCW 860/861
CCW MiraDRI 860/861 are self-adhering sheet membranes consisting of 56 mils (1.4 mm) of rubberized asphalt laminated to 4 mils (0.1 mm) of polyethylene to form a minimum 60-mil (1.5 mm) membrane. CCW MiraDRI 860 membrane is a summer-grade material, suitable for installations where the ambient temperature is 40°F (4.4°C) or above. CCW MiraDRI 861…
Read MoreCarlisle CCW 703
CCW-703 Liquiseal liquid-applied membrane is a two-component polyurethane waterproofing system. It is self-curing, forming a seamless, impermeable coating that bonds tightly to an appropriate substrate, preventing the lateral transfer of water. Liquiseal is easily mixed at the jobsite and applied using a squeegee, trowel, or spray equipment, providing a waterproof rubber membrane. Liquiseal is available…
Read MoreCarlisle CCW Barricoat (Roller)
Barricoat-R is a water-based asphalt emulsion modified with a blend of synthetic rubbers and special additives. Barricoat-R is formulated to a thick consistency, so it will hang easily on vertical surfaces at high thickness. Barricoat-R is applied by roller or brush, and air-dries to a rubber-likeconsistency. Barricoat-R is often used as an accessory product in…
Read MoreCarlisle CCW MiraCLAY
CCW MiraCLAY has a uniform layer of sodium bentonite clay that is sandwiched between a durable puncture-resistant nonwoven polypropylene fabric and a high-tensile strength woven polypropylene fabric and then needle punched together with thousands of high-strength denier yarns. These fibers are then thermally fused to the polypropylene in a proprietary Infrabond™ procedure that locks the…
Read MoreCarlisle CCW MiraCLAY EF
CCW MiraCLAY EF has a uniform layer of sodium bentonite clay that is sandwiched between a durable puncture-resistant nonwoven polypropylene fabric and a high-tensile strength woven polypropylene fabric and then needle punched together with thousands of high-strength denier yarns. These fibers are then thermally fused to the polypropylene in a proprietary Infrabond™ procedure that locks…
Read MoreProsoco R-Guard
PROSOCO R-GUARD® Spray Wrap is a fluid-applied, air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and all other building wall assemblies. Once on the substrate, the easily applied liquid quickly dries into a rubberized, highly durable, water-resistant, vapor permeable membrane. PROSOCO…
Read MoreHenry Air Bloc 07
Air-bloc 07 is a one component, polymer modified bitumen, liquid membrane designed to resist air leakage when applied to construction surfaces while remaining permeable to the passage of water vapor. Features: cold applied by trowel Excellent adhesion to most construction surfaces such as a masonry, concrete, stone, wood, gypsum board, rigid insulation and metal…
Read MoreBASF MBrace Putty
MBrace® Putty is a 100% solids non sag epoxy paste for use with the MBrace® Composite Strengthening System. It is used level small surface defects and to provide a smooth surface to which the MBrace® System will be applied. Features: 100% Solids epoxy Suitable for low-temperature application
Read More