Posts by admin
Pecora DynaFlex
Pecora DynaFlex is a unique two-part, non-sag elastomeric polyurethane joint sealant with many of the strengths of an epoxy but with the flexibility and user-friendly ease-of-application properties of a urethane. Dynaflex is designed to achieve high tensile and tear strength, abrasion resistance and an ultimate Shore A hardness of 55, yet withstand 25% total joint…
Read MoreDow Corning 795
DC 795 is a one-part, neutral-cure, architectural-grade sealant that easily extrudes in any weather and cures quickly at room temperature. This cold-applied, non-sagging silicone material cures to a medium-modulus silicone rubber upon exposure to atmospheric moisture. The cured sealant is durable and flexible enough to accommodate +50% movement of original joint dimension. Features: Suitable…
Read MoreDow Corning 995
DC 995 Silicone Structural Adhesive is a one-component, self-priming, shelf-stable, nuetral-cure, elastomeric adhesive specifically formulated for silicone structural glazing. The rate of surface cure and cure-in-depth of most one-component RTV silicone sealants is affected by the temperature and humidity of the environment. However, an environment of high temperatures in combination with high humidity may slow…
Read MoreDow Corning 983
DC 983 Silicone Glazing and Curtainwall Adhesive/Sealant is designed for use in structural adhesive/sealant applicationssuch as factory glazing and curtain-wall production. 983 sealant is a two-component, neutral curing part silicone formulation that cures to a high-modulus elastomeric adhesive sealant. Features: Structural capability Excellent adhesion to most surfaces including glass, reflective coatings, metals and paints.…
Read MoreCCW 705 – TWF
CCW 705 – TWF is designed to provide moisture protection in cavity wall construction. its self adhesive nature allows easy installation on concrete, masonry, gypsum, steel, and wood substrates. A silicone release liner prevents the material from sticking together in the roll, and is easily removed for installation. CCW_707-TWF is available in convenient widths 12″,…
Read MoreCCW Pre-Kleened EPDM
Pre-Kleened is a user friendly thru-wall flashing, which requires few accessories and can be installed at any temperature.UV & Ozone resistant. The product has talc washed from surfaces during production to facilitate field handling and installation. Primarily used as a through-wall flashing in masonry wall and cavity wall construction. The product is also used in…
Read MoreCCW AWP Primer
AWP is a single component latex-based primer. As an accessory product to the MiraDri860/861 it is designed to set the dust on concrete and block surfaces, to promote adhesion of the CCW waterproofing membrane to the substrate.
Read MoreCCW 702
CCW 702 is a quick-drying, solvent-based, high-tack adhesive specifically designed to adhere CCW sheet membrane waterproofing products..
Read MoreCCW 715 Primer
CCW 715 is designed to allow adhesion of CCW Sheet membranes to damp or partially cured concrete surfaces. This allows installation of membrane as soon as forms are removed. Do not apply, where visible water is present. Trapped water may cause blistering, keep direct sunlight off membrane and backfill immediately.
Read MoreCarlisle CCW-705
Carlisle CCW-705 Air & Vapor Barrier manufactured by Carlisle Coatings and Waterproofing is a 40-mil-thick (0.040 inch) composite membrane consisting of a rubberized-asphalt adhesive laminated to a tough, dimensionally stable, smooth-surfaced poly film. CCW-705 is provided in rolls of various widths lined with disposable silicone-coated plastic release film. The release film is removed to expose…
Read More