Posts by admin
BASF MBrace EG 900
MBrace® EG 900 is a dry fabric constructed of high quality E-glass fibers. These fabrics are applied onto the surface of existing structural members in buildings, bridges, and other structures using the MBrace® family of performance polymers. The result is an externally bonded FRP (fiber reinforced polymer) reinforcement system that is engineered to increase the…
Read MoreBASF MBrace Saturant LTC
MBrace® Saturant LTC is a 100% solids, low viscosity epoxy material that is used to encapsulate MBrace® carbon, glass, and aramid fiber fabrics. Based on a unique amine curing agent technology, MBrace® Saturant LTC is designed to cure at ambient temperatures as low as 40° F (5° C) and substrate temperatures as low as 32°…
Read MoreBASF MBrace Topcoat ATX
MBrace Topcoat ATX is a protective coating for use with the MBrace System. This “concrete-gray” topcoat conceals the system and protects the system from ultaviolet radiation and mild abrasion. A one-component, high solids technology, MBrace Topcoat ATX can be installed quickly, safely, and economically. Features: Low VOC’s High build finish Waterborne Can be applied…
Read MoreBASF MBrace Topcoat FRL
MBrace Topcoat FRL is a water-based, copolymer intumescent coating which imparts excellent fire retardant characteristics to the WaboMBrace composite strengthening system. A one-component air dry technology, MBrace Topcoat FRL can be installed quickly, safely, and economically. Features: Low VOC’s Waterborne Abrasion Resistant Economical Complies with the Uniform Building code (UBC) provisions for a Class…
Read MorePrime-Flex 900 LVSF
Prime-Flex 900LVSF is a solvent free, hydrophilic, liquid polyurethane injection resin designed to seal leaks in concrete and masonry structures. When it contacts water, Prime-Flex 900LVSF expands up to 700% and forms a tough, flexible foam seal that cannot be penetrated by water.
Read MoreSikaFix HH LV
SikaFix HH LV is a hydrophobic polyurethane that, when used alone or with SikaFix Accelerator,is designed to form flexible gaskets or plug joints and cracks in concrete from water infiltration. Features: Easy to apply, one component with accelerator Hydrophobic, only a small amount of water is needed for reaction Expands up to 30 times…
Read MoreMaster Builder MBrace System
The MBrace Composite Strengthening System is an externally bonded FRP (fiber reinforced polymer) reinforcement system used to strengthen existing concrete and masonry structures. Watson Bowman Acme offers a fabric version as well as a carbon/epoxy laminate version of MBrace Composite Strengthening System.
Read MoreConproco Conpro Super Seal
Conproco Conpro Super Seal is a spray or brush applied, capillary/crystalline slurry, for positive and negative side waterproofing of concrete structures. 2 coat application will withstand 57 ft. hydrostatic pressure. Non-reversible chemical reaction develops crystalline structure in capillaries that block liquid phase water.
Read MoreSika Sikadur Epoxy Broadcast Overlay
Sikadur Epoxy Broadcast Overlay System is a 2-component, moisture-tolerant, 100% solids epoxy resin binder for a traffic-bearing, skid-resistant, seamless, protective, overlay system for application by the broadcast method. The Sikadur Epoxy Broadcast Overlay System uses Sikadur 22 Lo-Mod as the binder coat. Sikadur Epoxy Broadcast overlay System can be used with and without a primer…
Read MoreBASF Thoroc Trafficguard EP 35
Trafficguard EP35 is a rapid-curing, skid-resistant, epoxy-based concrete overlay system. When mixed with aggregate it can be used as a repair mortar. Features: Rapid strength development Waterproof Low Modulus 90% lighter than typical concrete overlays Excellent adhesion to the substrate Skid-resistant 1 to 1 mix ration volume Produces a durable surface No primer required…
Read More