Prime Gel 2500 Quick Bond

Prime Gel 2500 is an extremely fast setting, smooth consistency two component epoxy gel adhesive that won’t sag, run or drip in vertical or overhead applications. Two Component 100% solids Paste consistency Multi-purpose epoxy resin adhesive

Read More

766 Limestone and Masonry Prewash

Sure Klean® 766 Limestone & Masonry Prewash is a strong, alkaline-based cleaning compound formulated for use with Sure Klean® Restoration Cleaner, Limestone & Masonry Afterwash or Limestone Restorer. When used properly, the prewash dissolves and assists in removing heavy carbon encrustations from brick, terra cotta, sandstone, limestone and most other masonry. Old masonry in high-pollution…

Read More

HeliBar & HeliBond

HeliBar & HeliBond: cracked masonry is best stabilized by bonding HeliBar stainless steel bars into appropriate bed joints or cut slots. Tensile loads are redistributed along the masonry to minimize further developments of the crack which may occur when direct crack injection techniques are used.   Features: Austenitic stainless steel helical bars Combines great axial…

Read More

Mastertop Anvil-Top 100

MasterTop Anvil-Top 100 is a cement based metallic-aggregate silica-fume-enhanced material. It produces a low-slump industrial resurfacing topping that provides extra heavy-duty protection to floors with concentrated, high frequency traffic and high point loads.   Features: Low Slump Uniquely processed malleable metallic aggregate Spray-able with pneumatic equipment Eight times more wear-resistance than concrete Lower modulus of…

Read More

Mastertop Anvil 300

Mastertop® Anvil-Top® 300 is a cement-based metallic-aggregate floor topping. It provides extra heavy-duty protection in key areas subject to extreme abrasion and impacts. Its energy-absorbing capacity is significantly greater than plain concrete, integral fiber concrete, and high-strength natural-aggregate toppings.   Features: Extended working time High-slump (5-7″ (127-178mm) screedable consistency High compressive strengths Uniquely processed malleable…

Read More

Anvil-Bond

Anvil Bond is a 100% reactive two-component modified-aliphatic-amine epoxy resin with an amine hardener. It contains no solvents, fillers, or colorants.  Anvil Bond is used to bond Portland cement-based topping mixes to properly prepared and cleaned concrete surfaces.   Features: Premeasured kit-based packaging Excellent bond for high-strength metallic toppings Precise blend of aggregate

Read More

Conproco Conpro Seal

Conproco Conpro Seal is a spray or brushed applied, Portland cement based slurry, for negative waterproofing. Very breathable and very low permeability.   Features: 2 coats resists 12 ft. hydrostatic pressure Excellent freeze/thaw stability and abrasion resistance Resistant to deciding salts, chloride, chemical attack, and environmental pollution Stops radon infiltration Will not cause damage to…

Read More

Thoroseal

Thoroseal is a cement based, micro-porous (breathing), seamless coating used to fill, seal, waterproof and protect a variety of substrates including cast-in-place and pre-cast concrete, brick, common building and split-faced block, stucco, unglazed terra cotta, porous stone, shotcrete, gunite and other masonry substrates. It may be used on interior or exterior, above or below grade…

Read More

Fast Acting Stripper

Fast Acting Stripper is formulated specifically for removal of high strength paints and coatings such as epoxies, polyurethanes, and floor enamels.  Additionally, Fast Acting Stripper dissolves most spray paints, marking pens and lacquers.  Fast Act Stripper immediately emulsifies in water and may be rinsed with cold water, hot water or steam.   Features: Effectively removes…

Read More

Heavy Duty Paint Stripper

Heavy Duty Paint Stripper is an alkaline formula with organic solvents, removes multiple layers of paint and graffiti from masonry surfaces. Remains active for 24 hours.  One application of Heavy Duty Paint Stripper dissolves heavy accumulations of paint, most spray paint, lacquers, and graffiti, restoring old masonry to its original appearance.   Features: Remains active…

Read More