Products
Spal Pro RS 88
Spal-Pro RS 88 is a rapid setting polyurea polymer liquid of 100% solids content. When cured, Spal-Pro RS 88 is a gray, rubberlike solid with a hardness of Shore A86-90. RS 88 was developed to fill and protect joints in industrial concrete floors that are subject to hard wheels and heavy loads. Features: Higher…
Read MoreES-90
ES-90 is a two component, 100% solids content epoxy joint filler. Developed to fill and protect joints in industrial concrete floors that are subject to hard wheeled traffic. Its primary function is to support such traffic and protect joint edges. Advantages: 2-3 hour initial set time means same-day shaving, without heat Faster traffic ready…
Read MoreMM-80
A two component, 100% solids content epoxy joint filler. Designed to fill and protect joints in industrial concrete floors that are subject to hard wheeled material handling traffic and heavy loads. MM-80’s superior formulation yields sufficient rigidity to support loads crossing joints, protecting edges from spalling, and sufficient resiliency to prevent brittleness throughout the floor’s…
Read MoreEpolith G
Epolith®-P and Epolith®-G are two-part 100% solids epoxy joint fillers. Self-leveling Epolith®-P provides an abrasion- and puncture-resistant seal suitable for high-traffic horizontal joints. Gun-grade Epolith®-G provides a pick-and puncture-resistant seal for sloped and vertical joints. Features: Chemical Resistant Stiff yet resilient 100% solids Cut and pick resistant
Read MoreSikadur 51 NS
Sikadur 51 NS is a two-component, non-sagging, solvent free, moisture tolerant, flexible epoxy control joint sealer and adhesive. Features: 2 to 1 ration ensures easy mixing, easy handling An adhesive with excellent flexibility Excellent durability Conforms to ACI 302.1R (4.10-Joint Materials). Shock-absorbent cure Prevents deterioration of control-joint edges Use as a security sealant
Read MoreSikadur 51 SL
Sikadur 51 SL New and Improved – A two-component, self-leveling, 100% solids, flexible, control joint resin sealer and adhesive. Features: Remains flexible. Does not age-harden Prevents deterioration of joint edges Excellent adhesive properties Conforms to ACI 302.1R (4.10-Joint Materials). Ideal for use with plural injection type systems Can be used on grades up to…
Read MoreEMSHIELD DFR2 and EMSHIELD DFR3
EMSHIELD DFR2 and DFR3 are watertight, fire-rated, traffic-durable primary seals for both retrofit and new structural expansion joints in horizontal-plane applications. EMSHIELD DFR2 and DFR3 eliminate the need for additional fire blankets, mineral wools, liquid sealants, cover plates, or other fire stopping materials. For joints widths from 1/2 to 4-inches (12-100mm) where +25% and -25%…
Read MoreSpal-Pro RSF
Spal-Pro RSF is a rapid setting, two-component polyurea polymer liquid of 100% solids content. Developed to protect and fill joints in freezer room concrete floors that are subject to hard wheels and heavy loads. Its primary function is to support such traffic and support joint edges. Spal-Pro RSF is designed for use in areas where…
Read MorePecora Urexpan NR-300
Urexpan NR-300 is a two-part, chemically-curing, cold- applied self-leveling modified polyurethane elastomeric sealant that withstands heavy vehicular traffic and is virtually unaffected by jet fuel, hydraulic fluids, oil or lubricants. It is available in two versions: hand mix (Type H) and machine mix (Type M), the only difference being the rate of cure.
Read MorePrime Flex 900 LVSF
Prime-Flex 900LVSF is a solvent free, hydrophilic, liquid polyurethane injection resin designed to seal leaks in concrete and masonry structures. When it contacts water, Prime-Flex 900L VSF expands up to 700% and forms a tough, flexible foam seal that cannot be penetrated by water Features: No V.O.C.’s Single Component (no catalyst required) Extremely Flexible…
Read More