Products
Prosoco R-Guard
PROSOCO R-GUARD® Spray Wrap is a fluid-applied, air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and all other building wall assemblies. Once on the substrate, the easily applied liquid quickly dries into a rubberized, highly durable, water-resistant, vapor permeable membrane. PROSOCO…
Read MoreHenry Air Bloc 07
Air-bloc 07 is a one component, polymer modified bitumen, liquid membrane designed to resist air leakage when applied to construction surfaces while remaining permeable to the passage of water vapor. Features: cold applied by trowel Excellent adhesion to most construction surfaces such as a masonry, concrete, stone, wood, gypsum board, rigid insulation and metal…
Read MoreHenry Air Bloc 31
Henry Air-Bloc 31MR is a Liquid-applied with a trowel or spray, Henry’s Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc® 31MR cures to a tough, monolithic rubber-like membrane. Features Retains flexibility over a wide temperature range and bridges cracks Adheres to…
Read MoreHenry Blueskin Breather
Self-adhering membrane consisting of microporous film laminate, backed with a specially applied adhesive, which allows water vapor to permeate through while acting as a barrier to air and bulk bulk water. Features: High water vapour permeance allows wall assembly to “breathe” Resists hydrostatic water pressure and wind driven rain Excellent adhesion to prepared substrates…
Read MoreBASF MBrace Putty
MBrace® Putty is a 100% solids non sag epoxy paste for use with the MBrace® Composite Strengthening System. It is used level small surface defects and to provide a smooth surface to which the MBrace® System will be applied. Features: 100% Solids epoxy Suitable for low-temperature application
Read MoreBASF MBrace EG 900
MBrace® EG 900 is a dry fabric constructed of high quality E-glass fibers. These fabrics are applied onto the surface of existing structural members in buildings, bridges, and other structures using the MBrace® family of performance polymers. The result is an externally bonded FRP (fiber reinforced polymer) reinforcement system that is engineered to increase the…
Read MoreBASF MBrace Saturant LTC
MBrace® Saturant LTC is a 100% solids, low viscosity epoxy material that is used to encapsulate MBrace® carbon, glass, and aramid fiber fabrics. Based on a unique amine curing agent technology, MBrace® Saturant LTC is designed to cure at ambient temperatures as low as 40° F (5° C) and substrate temperatures as low as 32°…
Read MoreBASF MBrace Topcoat ATX
MBrace Topcoat ATX is a protective coating for use with the MBrace System. This “concrete-gray” topcoat conceals the system and protects the system from ultaviolet radiation and mild abrasion. A one-component, high solids technology, MBrace Topcoat ATX can be installed quickly, safely, and economically. Features: Low VOC’s High build finish Waterborne Can be applied…
Read MoreBASF MBrace Topcoat FRL
MBrace Topcoat FRL is a water-based, copolymer intumescent coating which imparts excellent fire retardant characteristics to the WaboMBrace composite strengthening system. A one-component air dry technology, MBrace Topcoat FRL can be installed quickly, safely, and economically. Features: Low VOC’s Waterborne Abrasion Resistant Economical Complies with the Uniform Building code (UBC) provisions for a Class…
Read MoreBASF MBrace Primer
MBrace® Primer is a low viscosity, 100% solids, polyamine cured epoxy. As the first applied component of the MBrace® System, it is used to penetrate the pore structure of cementious substrates and to provide a high bond base coat for the MBrace® System. MBrace® Primer is based on a unique adduct curing technology that results…
Read More