Posts Tagged ‘LIQUID’
Carlisle CCW 703
CCW-703 Liquiseal liquid-applied membrane is a two-component polyurethane waterproofing system. It is self-curing, forming a seamless, impermeable coating that bonds tightly to an appropriate substrate, preventing the lateral transfer of water. Liquiseal is easily mixed at the jobsite and applied using a squeegee, trowel, or spray equipment, providing a waterproof rubber membrane. Liquiseal is available…
Read MoreCarlisle CCW Barricoat (Roller)
Barricoat-R is a water-based asphalt emulsion modified with a blend of synthetic rubbers and special additives. Barricoat-R is formulated to a thick consistency, so it will hang easily on vertical surfaces at high thickness. Barricoat-R is applied by roller or brush, and air-dries to a rubber-likeconsistency. Barricoat-R is often used as an accessory product in…
Read MoreCarlisle Barriseal-S
Barriseal-S is a water-based asphalt emulsion modified with a blend of synthetic polymers and special additives. Barriseal-S is dispensed in tandem with Barricure, a non-corrosive, chloride-free deliquescent salt solution. Barriseal-S and Barricure are applied through approved co-spray equipment to achieve a nominal 0.040-inch (40 mils) dry film thickness. Barriseal-S can be applied over concrete block,…
Read MoreHenry Air-Bloc 32MR
Air-Bloc 32MR is a single component, fluid applied, elastomeric membrane designed to provide an air, water and vapor barrier when applied to above grade wall assemblies. This product cures to a tough monolithic rubber-like membrane which resists air leakage and water penetration plus acts as a vapor barrier. Air-Bloc 32MR combines the proven performance of…
Read MoreHenry Air-Bloc 06
Air-Block 06 is a one component electrometric bitumen, liquid membrane that is designed to provide an air barrier when applied to construction surfaces. Cures to provide a tough monolithic, rubber like membrane, which resists air leakage. Features: Cold applied by trowel or spray Excellent adhesion to most construction surfaces such as masonry, concrete, stone,…
Read MoreCarlisle CCW 525
CCW-525 is a liquid-applied, single component, moisture cured, elastomeric, coal-tar free, modified polyurethane which cures to form a flexible, monolithic, waterproof membrane on vertical or horizontal surfaces, above or below grade. The membrane has tenacious adhesion to concrete substrates preventing lateral water migration. The inherent toughness and resilience of CCW-525 Membrane enables it to bridge…
Read MoreCarlisle CCW Barricoat (Spray)
Barricoat-S is a water-based asphalt emulsion modified with a blend of synthetic polymers and special additives. Barricoat-S is dispensed in tandem with Barricure, a non-corrosive, chloride-free deliquescent salt solution. Barricoat-S and Barricure are applied through specialized co-spray equipment, which is provided by others and approved by CCW. During spray, Barricoat-S rapidly becomes firm, tack free…
Read MoreSonneborn Sonoshield HLM 5000
Sonoshield HLM 5000 is a one-component moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. It is available in 4 grades for application by trowel, squeegee, roller, and spray. Features: Standard and high-build systems. Waterproof Elastomeric Wide service-temperature range Chemical resistant Seamless cold applied membrane Asphalt-modified polyurethane
Read More