Products
PECORA 895 NST
A high-performing, neutral curing, medium modulus silicone sealant specifically designed for structural and non-structural glazing, with excellent aesthetic characteristics in that it will not stain sensitive porous natural stones such as granite or marble and will not contribute to residue run down on nonporous surfaces such as metal panel or glass curtain wall facades.
Read MoreHENRY Aquatac Primer
A primer for self-adhered membranes such as Blueskin WP 200 when applied to masonry, concrete, non-treated wood, drywall and metal.
Read MoreHENRY Blueskin Adhesive
An adhesive to increase bond strength to substrate for peel and stick membranes such as Blueskin® SA, VP, TWF and Foilskin/Metal Clad when applied to masonry, concrete, wood, gypsum board, GP Dens Glass Gold® and metal surfaces. HE571 – BLUESKIN ADHESIVE is the adhesive of choice on above grade applications of peel and stick membranes…
Read MoreCARLISLE CCW 702 LV
A quick drying, solvent based, high-tack adhesive specifi cally designed to promote maximum adhesion of CCW Sheet Membrane Waterproofing products.
Read MoreBASF Conipur E
A fluid applied epoxy / polyurethane waterproofing system comprised of a flexible polyurethane base coat and a semi-rigid epoxy topcoat. Conipur ® E uses fast setting two-component reactive curing mechanisms. It has very low odor and is VOC compliant.
Read MoreBASF Conipur Plus
Conipur ® Plus consists of: Sonoguard ® Base Coat – a one component, moisture curing polyurethane. Conipur 275 – a two component fast curing aromatic polyurethane top coat with outstanding mechanical properties, including high tensile strength, and excellent tear and abrasion resistance. Conipur ® 295 UV is a high performance, two component, aliphatic, polyaspartic modified,…
Read MoreBASF Conipur II
a fluid-applied polyurethane waterproofing system. Conipur ® II uses a fast-setting two-component reactive curing mechanism. It has a very low odor and is VOC compliant.
Read MoreDRYLOK Masonry Waterproofer
Formulated for waterproofing all interior, exterior, above or below grade masonry walls, cinder and concrete blocks, stucco and brick, retaining walls, fish ponds, birdbaths, basement walls and foundations.
Read MoreEMSEAL Submerseal
A joint-face-adhered, precompressed, primary seal for retrofit and new structural expansion joints and construction joints where continuous or intermittent immersion or contact with chlorinated water (up to 5 ppm), saline water or potable water is planned.
Read More3M 3015 Vapor Permeable Air Barrier
A high performance, vapor impermeable, self-adhered membrane possessing good adhesion, elongation and self-sealing properties that make it ideal for use as a secondary barrier behind exterior cladding systems. The membrane material is a proprietary film developed by 3M that is unlike any other existing weather/secondary barrier product. The adhesive contains no asphalt or butyl. Only…
Read More