HENRY Aquabloc SB

A one component elastomeric waterproofing membrane. It is applied in a single or reinforced application and cures through solvent evaporation to provide a heavy-duty, seamless, rubber-like, impervious membrane. Aqua-Bloc® SB can be trowel or spray applied.

Read More

Carlisle CCW MiraCLAY EF

CCW MiraCLAY EF has a uniform layer of sodium bentonite clay that is sandwiched between a durable puncture-resistant nonwoven polypropylene fabric and a high-tensile strength woven polypropylene fabric and then needle punched together with thousands of high-strength denier yarns. These fibers are then thermally fused to the polypropylene in a proprietary Infrabond™ procedure that locks…

Read More

Carlisle CCW MiraCLAY

CCW MiraCLAY has a uniform layer of sodium bentonite clay that is sandwiched between a durable puncture-resistant nonwoven polypropylene fabric and a high-tensile strength woven polypropylene fabric and then needle punched together with thousands of high-strength denier yarns. These fibers are then thermally fused to the polypropylene in a proprietary Infrabond™ procedure that locks the…

Read More

Carlisle CCW Barricoat (Roller)

Barricoat-R is a water-based asphalt emulsion modified with a blend of synthetic rubbers and special additives. Barricoat-R is formulated to a thick consistency, so it will hang easily on vertical surfaces at high thickness. Barricoat-R is applied by roller or brush, and air-dries to a rubber-likeconsistency. Barricoat-R is often used as an accessory product in…

Read More

Carlisle CCW 703

CCW-703 Liquiseal liquid-applied membrane is a two-component polyurethane waterproofing system. It is self-curing, forming a seamless, impermeable coating that bonds tightly to an appropriate substrate, preventing the lateral transfer of water. Liquiseal is easily mixed at the jobsite and applied using a squeegee, trowel, or spray equipment, providing a waterproof rubber membrane. Liquiseal is available…

Read More

Carlisle CCW 525

CCW-525 is a liquid-applied, single component, moisture cured, elastomeric, coal-tar free, modified polyurethane which cures to form a flexible, monolithic, waterproof membrane on vertical or horizontal surfaces, above or below grade.  The membrane has tenacious adhesion to concrete substrates preventing lateral water migration.  The inherent toughness and resilience of CCW-525 Membrane enables it to bridge…

Read More

Carlisle CCW Barricoat (Spray)

Barricoat-S is a water-based asphalt emulsion modified with a blend of synthetic polymers and special additives. Barricoat-S is dispensed in tandem with Barricure, a non-corrosive, chloride-free deliquescent salt solution. Barricoat-S and Barricure are applied through specialized co-spray equipment, which is provided by others and approved by CCW. During spray, Barricoat-S rapidly becomes firm, tack free…

Read More

Carlisle CCW 860/861

CCW MiraDRI 860/861 are self-adhering sheet membranes consisting of 56 mils (1.4 mm) of rubberized asphalt laminated to 4 mils (0.1 mm) of polyethylene to form a minimum 60-mil (1.5 mm) membrane. CCW MiraDRI 860 membrane is a summer-grade material, suitable for installations where the ambient temperature is 40°F (4.4°C) or above. CCW MiraDRI 861…

Read More

Sonneborn Sonoshield HLM 5000

Sonoshield HLM 5000 is a one-component moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications.  It is available in 4 grades for application by trowel, squeegee, roller, and spray.   Features: Standard and high-build systems. Waterproof Elastomeric Wide service-temperature range Chemical resistant Seamless cold applied membrane Asphalt-modified polyurethane  

Read More