Posts by admin
Tundra Foam
Tundra Foam is a open Cell polyurethane backer rod for hot and cold sealant applications. Ideal for non-uniform joint sizes. Commonly used to control sealant and caulking depth. Used to create a backstop to allow proper sealant tooling and configuration.
Read MoreHot Rod XL
Hot Rod XL is a crosslinked closed cell polyethylene backer rod for hot pour sealant applications. Hot Rod XL is an ideal non-absorbent compressible backup material inserted into a joint to control a sealant depth and create a back stop.
Read MoreCarlisle CCW 525
CCW-525 is a liquid-applied, single component, moisture cured, elastomeric, coal-tar free, modified polyurethane which cures to form a flexible, monolithic, waterproof membrane on vertical or horizontal surfaces, above or below grade. The membrane has tenacious adhesion to concrete substrates preventing lateral water migration. The inherent toughness and resilience of CCW-525 Membrane enables it to bridge…
Read MoreCarlisle CCW Barricoat (Spray)
Barricoat-S is a water-based asphalt emulsion modified with a blend of synthetic polymers and special additives. Barricoat-S is dispensed in tandem with Barricure, a non-corrosive, chloride-free deliquescent salt solution. Barricoat-S and Barricure are applied through specialized co-spray equipment, which is provided by others and approved by CCW. During spray, Barricoat-S rapidly becomes firm, tack free…
Read MoreHenry Air Bloc 31
Henry Air-Bloc 31MR is a Liquid-applied with a trowel or spray, Henry’s Air-Bloc® 31MR is a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Air-Bloc® 31MR cures to a tough, monolithic rubber-like membrane. Features Retains flexibility over a wide temperature range and bridges cracks Adheres to…
Read MoreHenry Blueskin Breather
Self-adhering membrane consisting of microporous film laminate, backed with a specially applied adhesive, which allows water vapor to permeate through while acting as a barrier to air and bulk bulk water. Features: High water vapour permeance allows wall assembly to “breathe” Resists hydrostatic water pressure and wind driven rain Excellent adhesion to prepared substrates…
Read MoreBASF MBrace Primer
MBrace® Primer is a low viscosity, 100% solids, polyamine cured epoxy. As the first applied component of the MBrace® System, it is used to penetrate the pore structure of cementious substrates and to provide a high bond base coat for the MBrace® System. MBrace® Primer is based on a unique adduct curing technology that results…
Read MoreBASF MBrace Saturant
MBrace Saturant is a 100% solids, low viscosity epoxy material that is used to encapsulate MBrace carbon and glass fiber fabrics. When reinforced with MBrace fiber fabrics, the MBrace Saturant cures to provide a high performance FRP laminate. The resulting FRP laminate can provide additional strength to concrete, masonry, steel, and wood structural elements. …
Read MoreBASF Master Builder MBrace System
The MBrace Composite Strengthening System is an externally bonded FRP (fiber reinforced polymer) reinforcement system used to strengthen existing concrete and masonry structures. Watson Bowman Acme offers a fabric version as well as a carbon/epoxy laminate version of MBrace Composite Strengthening System. Features: High strength, high stiffness Lightweight Highly durable, non corrosive Low installation…
Read MoreExample Market Page
Example filtered product demo: {loadposition marketdemo}
Read More