Posts by admin
Anvil-Bond
Anvil Bond is a 100% reactive two-component modified-aliphatic-amine epoxy resin with an amine hardener. It contains no solvents, fillers, or colorants. Anvil Bond is used to bond Portland cement-based topping mixes to properly prepared and cleaned concrete surfaces. Features: Premeasured kit-based packaging Excellent bond for high-strength metallic toppings Precise blend of aggregate
Read MoreConproco Conpro Seal
Conproco Conpro Seal is a spray or brushed applied, Portland cement based slurry, for negative waterproofing. Very breathable and very low permeability. Features: 2 coats resists 12 ft. hydrostatic pressure Excellent freeze/thaw stability and abrasion resistance Resistant to deciding salts, chloride, chemical attack, and environmental pollution Stops radon infiltration Will not cause damage to…
Read MoreThoroseal
Thoroseal is a cement based, micro-porous (breathing), seamless coating used to fill, seal, waterproof and protect a variety of substrates including cast-in-place and pre-cast concrete, brick, common building and split-faced block, stucco, unglazed terra cotta, porous stone, shotcrete, gunite and other masonry substrates. It may be used on interior or exterior, above or below grade…
Read MoreFast Acting Stripper
Fast Acting Stripper is formulated specifically for removal of high strength paints and coatings such as epoxies, polyurethanes, and floor enamels. Additionally, Fast Acting Stripper dissolves most spray paints, marking pens and lacquers. Fast Act Stripper immediately emulsifies in water and may be rinsed with cold water, hot water or steam. Features: Effectively removes…
Read MoreHeavy Duty Paint Stripper
Heavy Duty Paint Stripper is an alkaline formula with organic solvents, removes multiple layers of paint and graffiti from masonry surfaces. Remains active for 24 hours. One application of Heavy Duty Paint Stripper dissolves heavy accumulations of paint, most spray paint, lacquers, and graffiti, restoring old masonry to its original appearance. Features: Remains active…
Read MoreSafety Peel 1
Safety Peel 1 is a solvent paste with a mild citrus odor that contains no methylene chloride or methanol. Designed for removal of paint, graffiti, and clear coatings. A “slow-working” paint remover, usually just one application dissolves many layers. Safety Peel 1 reduces environmental and applicator risks associated with use of conventional chemical paint removers. …
Read MoreSafety Peel 2
Safety Peel 2 is an alkaline paste containing potassium hydroxide, is formulated to simplify rinsing and neutralization requirements. Reduces the volume of waste generated by conventional liquid and paste removal systems. Formulated as a “slow working” paint remover, Safety Peel 2 removes heavy accumulations of paint and graffiti from masonry surfaces. One application of Safety…
Read MoreSonneborn Sonolastic Polysulfide Sealant
Sonneborn Sonolastic Polysulfide Sealant is a multi-component, high-performance, low-modulus polysulfide sealant. Its elastomeric properties allow +25% joint movement. It withstands constant water immersion and will not degrade under limited chemical exposure. Features: Nonstaining’ colorfast Easy to gun and tool Capable of +25% joint movement Waterproof
Read MorePecora Synthacalk GC 2
Pecora Synthacalk GC 2 provides a durable, elastomeric, weather-tight seal for caulking joints in commercial and industrial projects. It is particulary effective where exposure to solvents or chemicals are anticipated.
Read MoreSonneborn's NP 1
Sonneborn’s NP 1 is a one-component, high performance, nonpriming, gun-grade, elastomeric polyurethane sealant. It requires no mixing and typically requires no priming to bond to many materials, including concrete and masonry. Features: Ready to use Joint movement capability +35% Easy to gun and tool Available in cartridges, 20 ounce ProPaks, and in bulk Twelve…
Read More