Posts by admin
CARLISLE CCW-500
A single-component, rubberized asphalt compound that forms a tough, fl exible, thick waterproofi ng membrane. CCW-500 is comprised of 26% pre-consumer material and can contribute toward LEED® credits in new construction. CCW-500 adheres tenaciously to virtually any sound vertical or horizontal surface, to ensure water will not migrate beneath the membrane in the event of physical…
Read MoreHENRY CM-100
A fast curing, one component elastomeric, solvent free, moisture cure waterproofing compound designed to provide a cold alternative to hot applied rubberized membrane systems or replace conventional hot mop felt ply and/or pre-formed sheeting systems. It is applied in a high build two ply system or single ply application which cures through reaction with airborne moisture…
Read MoreCARLISLE CCW- Liqui-deck
A solvent-free, two-compound polyurethane compound for preparing and leveling rough concrete surfaces prior to the installation of CCW MiraDRI® 860/861 Sheet Membrane Waterproofing. The low-viscosity compound fills voids and cures to form a well adhered elastomeric membrane.
Read MoreCARLISLE CCW-Miraseal
A 100%-solids, fl uid-applied, single-component, moisturereacted, elastomeric, coal-tar and solvent-free, modifi ed polymer that cures to form a fl exible, monolithic, waterproof membrane on vertical and horizontal surfaces. Due to the moisture-reactive and non-gassing properties of the membrane, it provides tenacious adhesion to concrete substrates above- and below-grade, preventing lateral water migration, even with moisture present…
Read MoreCARLISLE CCW-860/861
Self-adhering sheet membranes consisting of 56 mils (1.4 mm) of rubberized asphalt laminated to 4 mils (0.1 mm) of polyethylene to form a minimum 60-mil (1.5 mm) membrane. CCW MiraDRI 860 membrane is a summer-grade material, suitable for installations where the ambient temperature is 40°F (4.4°C) or above. CCW MiraDRI 861 should be used for…
Read MoreSIKA Sikasil GP
A one part moisture curing silicone sealant suitable for use in a broad range of applications. It is easy to apply and offers excellent adhesion to a variety of non-porous substrates such as glass, glazed ceramic tiles and aluminum.
Read MoreSIKA Sikasil WS-290
A one-part, neutral-curing, ultra low-modulus, low to no bleed silicone sealant that cures to a durable, flexible building sealant Sikasil WS-290 performs exceptionally well under dynamic conditions due to its ultra-low modulus, high extension/compression, recovery properties and strong adhesion to most building materials. Sikasil WS-290 accommodates long-term movement of +100-50% in properly designed joints and is…
Read MoreSIKA Sikasil WS-295
A one part, neutral cure silicone sealant for use in most common weatherproofing applications on a wide variety of materials.
Read MorePECORA 864 NST
one-part, low-modulus, neutral-curing, high-performance silicone sealant that cures via atmospheric moisture to form a durable, flexible building seal. Pecora 864NST will not stain natural stone such as marble and granite. Because of its low-modulus, high extension/ compression and recovery properties, and its strong adhesion to most building materials, Pecora 864NST performs exceptionally well under dynamic…
Read MorePECORA 890 NST
A one-part, neutral-curing, ultra low-modulus silicone sealant that will not stain natural stone such as marble and granite and that reacts with atmospheric moisture to form a durable, flexible building sealant. Pecora 890NST performs exceptionally well under dynamic conditions due to its ultra-low modulus, high extension/ compression, recovery properties and strong adhesion to most building materials…
Read More