A single-component, rubberized asphalt compound that forms a tough, fl exible, thick waterproofi ng membrane. CCW-500 is comprised of 26% pre-consumer material and can contribute toward LEED® credits in new construction. CCW-500 adheres tenaciously to virtually any sound vertical or horizontal surface, to ensure water will not migrate beneath the membrane in the event of physical damage. The fast setup time speeds the completion of the waterproofi ng. CCW-500 Hot- Applied Liquid Membrane is applied in a thick, monolithic coating utilizing CCW Reinforcing Fabric, which allows for a wide variety of substrate conditions. CCW- 500 is used for waterproofi ng split-slab construction projects and is especially suited as the waterproofi ng membrane on roof decks using the inverted roof membrane assemblies and green roof systems.

A fast curing, one component elastomeric, solvent free, moisture cure waterproofing compound designed to provide a cold alternative to hot applied rubberized membrane systems or replace conventional hot mop felt ply and/or pre-formed sheeting systems. It is applied in a high build two ply system or single ply application which cures through reaction with airborne moisture to provide a heavy-duty "seamless" rubber-like, impervious membrane.

A solvent-free, two-compound polyurethane compound for preparing and leveling rough concrete surfaces prior to the installation of CCW MiraDRI® 860/861 Sheet Membrane Waterproofing. The low-viscosity compound fills voids and cures to form a well adhered elastomeric membrane.

A 100%-solids, fl uid-applied, single-component, moisturereacted, elastomeric, coal-tar and solvent-free, modifi ed polymer that cures to form a fl exible, monolithic, waterproof membrane on vertical and horizontal surfaces. Due to the moisture-reactive and non-gassing properties of the membrane, it provides tenacious adhesion to concrete substrates above- and below-grade, preventing lateral water migration, even with moisture present in the concrete. The inherent toughness and resilience of MiraSEAL enables it to bridge structural or shrinkage cracks that may develop in the substrate. MiraSEAL can be applied wet on wet in a horizontal application resulting in reduced installation time.

Self-adhering sheet membranes consisting of 56 mils (1.4 mm) of rubberized asphalt laminated to 4 mils (0.1 mm) of polyethylene to form a minimum 60-mil (1.5 mm) membrane. CCW MiraDRI 860 membrane is a summer-grade material, suitable for installations where the ambient temperature is 40°F (4.4°C) or above. CCW MiraDRI 861 should be used for applications between 25°F (-3.9°C) and 65°F (18°C). The combination of these two excellent waterproofing materials provides a high-performance, extremely durable waterproofing barrier. CCW MiraDRI 860/861 membranes are used for vertical and horizontal waterproofing on structural foundation walls and decks.

A one part moisture curing silicone sealant suitable for use in a broad range of applications. It is easy to apply and offers excellent adhesion to a variety of non-porous substrates such as glass, glazed ceramic tiles and aluminum.

A one-part, neutral-curing, ultra low-modulus, low to no bleed silicone sealant that cures to a durable, flexible building sealant Sikasil WS-290 performs exceptionally well under dynamic conditions due to its ultra-low modulus, high extension/compression, recovery properties and strong adhesion to most building materials. Sikasil WS-290 accommodates long-term movement of +100-50% in properly designed joints and is particularly well suited for use in Exterior Insulation Finish Systems (EIFS).

A one part, neutral cure silicone sealant for use in most common weatherproofing applications on a wide variety of materials.

one-part, low-modulus, neutral-curing, high-performance silicone sealant that cures via atmospheric moisture to form a durable, flexible building seal. Pecora 864NST will not stain natural stone such as marble and granite. Because of its low-modulus, high extension/ compression and recovery properties, and its strong adhesion to most building materials, Pecora 864NST performs exceptionally well under dynamic conditions accommodating long-term movement of ±50% in properly designed joints.

A one-part, neutral-curing, ultra low-modulus silicone sealant that will not stain natural stone such as marble and granite and that reacts with atmospheric moisture to form a durable, flexible building sealant. Pecora 890NST performs exceptionally well under dynamic conditions due to its ultra-low modulus, high extension/ compression, recovery properties and strong adhesion to most building materials and accommodates long-term movement of +100-50% in properly designed joints.

A high-performing, neutral curing, medium modulus silicone sealant specifically designed for structural and non-structural glazing, with excellent aesthetic characteristics in that it will not stain sensitive porous natural stones such as granite or marble and will not contribute to residue run down on nonporous surfaces such as metal panel or glass curtain wall facades.

A primer for self-adhered membranes such as Blueskin WP 200 when applied to masonry, concrete, non-treated wood, drywall and metal.


Contact a TB Philly Representative Online

Online Inquiry Form

or call us at: 610.482.6001

TBP Group Business Office Thoms Drive Suite 411  Phoenixville, PA 19460
Phone 610-482-6001  Fax 610-933-4910  email: